About 5SP Parking System

5SP Parking System side-way type

5SP Parking System side-way type

(Animation reproduces when the image is clicked)

5SP Parking System length-way type

5SP Parking System length-way type

(Animation reproduces when the image is clicked)

"5SP parking system" of M.P.E. is a method which can make good use of the space, because of choosing side-way type or length-way type according to various land shape and securing the upper space of the entrance for parking by the movement of three axes (these are our license).
We do the design that thoroughly pursued safety as  "always a lifter is under persons and cars" when a car go into and out.
In addition, by various designs that made good use of advanced technology such as inverter control, the friction system (our patent) and so on, we acquire nine kinds of Minister of Land, Infrastructure, Transport and Tourism authorization and acquire five patents.
This parking system which thoroughly pursues safety and rationality, has a lot of aptitudes as urban facilities.

Product introduction is here

System examples

5SP-CLW type (length-way type)

■Entry system flow
1)Stop a car briefly in front of entrance, and then open entrance gate.

2)Move the car into a machine and park it on a pallet, a driver goes out of it.

3)Entrance gate closes. Then a lifter rises, a traverser moves at the same time.

The lifter stops at the set floor, the traverser stops in front of a car room.

4)It stores the car in the car room. Entry is complete.
■Exit system flow
1)Move a stored car on a traverser.

2)A lifter lowers, the traverser moves at the same time. Both the lifter and the traverser stop at the entrance floor.

3)Entrance gate opens, move the car out of machine and stop it on a turntable.

4)It turns the car 180゜. Exit is complete.

5SP-CW type (side-way type)

■Entry system flow
1)Stop a car briefly in front of entrance, and then open entrance gate.

2)Move the car into a machine and park it on a pallet, a driver goes out of it.

3)Entrance gate closes. A lifter rises and stops at the set floor.

4)The traverser moves and stops in front of a car room.

5)It stores the car in the car room. Entry is complete.
■Exit system flow
1)Move a stored car on a traverser.

2)It moves and stops on a lifter.

3)The lifter lowers and stops at the entrance floor.

4)Entrance gate opens, move the car out of machine and stop it on a turntable.

5)It turns the car 180゜.Exit is complete.

5SP-WTi type (180ーturn)

■Entry system flow
1)Stop a car briefly in front of entrance, and then open entrance gate.

2)Move the car into a machine, a driver goes out of it.

3)Entrance gate closes. A lifter rises and stops at the set floor.

4)It stores the car in a car room. Entry is complete.

■Exit system flow
1)Move a stored car on a traverser.

2)A lifter lowers and stops at the entrance floor.

3)A turntable turns 180゜and then stops.

4)Entrance gate opens, move the car out of machine. Exit is complete.

PAGE TOP